FEATURES:

With high voltage and digitization of the data occurring in the probe rather than the instrument, measurement quality is no longer dependent on cable quality as with older analog systems. Also, the probes can be plugged in "hot" without powering down the instrument - the instrument immediately recognizes the probe and automatically switches measurement mode to the mode required for that specific probe.

Calibrations and QA measurements can be performed directly with the probe, without even using the instrument, by connecting the probe to a computer with Radiagem calibration software, allowing your Radiagem meter to remain deployed in the field.

A data-logging button allows the user to store up to 1000 date stamped data points in probe memory for external probes and in the Radiagem meter memory for internal dose-rate detector (see probes' specifications). A scaler/timer mode can be used for data-logging with 1 to 255 seconds acquisition time. The Radiagem 4000 firmware can be upgraded via PC serial link with the appropriate cable.

The Radiagem 4000 LCD display includes a large choice of units depending on the probe specification: CPM, DPMeq, DPMeq/100 cm2, rem/h and R/h.

A Radiagem meter is also part of the emergency kits that include a variety of contamination probes.