Halogen-quenched GM tube with thin mica end window. Mica window density 1.5-2.0 mg/cm2. Effective window diameter is .360 inch. Side wall is .012 inch thick.
mR/hr - .001 (1μR) to 200 mR/hr
μSv/hr - .01 to 2000
CPM - 0 to 214,000
CPS - 0 to 3575
Total/ Timer - 1 to 9,999,000 counts
Typically ±15% of reading. ±10% typical (NIST)
Internally mounted beeper (can be switched off for silent operation)
Red LED fashes with each count.
USB for Observer USB Software Family
1070 CPM/mR/hr referenced to Cs137
Detects alpha down to 2.5 MeV; typicaldetection efficiency at 3.6 MeV is greater than 80%.
Detects beta at 50 keV with typical35% detection efficiency.
Detects beta at 150 keV with typical 75% detection efficiency.
Detects gamma and x-rays down to 10 keV typical through the window, 40 keV minimum through the case.
Backlit Graphic LCD
Sounds with each count (can be switched off for silent operation)
Readout will hold at full scale in radiation fields as high as 100 times the maximum reading.
Power Requirements 2 AA alkaline batteries
Carrying Case, Xtreme Boot, Stand, Mini-USB Cable, Observer USB Software Download, Certificate of Conformance
1 year limited warranty
The RAD 100™ is a general purpose geiger counter that measures alpha, beta, gamma, and X-radiation.
It is intended for personal safety and educational purposes.
Like the popular Radalert® 100X, the RAD 100™ features a 3-second update on its digital liquid crystal display (LCD). The LCD shows the current radiation level in your choice of microsieverts per hour (SI units) from .000 to 1,100, either counts per minute (CPM) from 0 to 350,000 or counts per second (CPS) from 0 to 3,500. When mR/hr units are selected, the LCD shows readings in milliroentgens per hour from .000 to 110. This instrument also offers an accumulated total and timer function, up to 9,999,000 counts and 40 hours. A red LED blinks and a beeper chirps with each count (the chirp can be muted).
ONYX® can be used as a stand alone pocketable instrument, or it can connect to the internet and share data. The ONYX has a six button touch sensitive keypad that allows for easy use of a wide variety of functions such as graphic display of data, adjustment of audio chirp, data logging, changing units of measurement and calibration. ONYX also permits the user to upgrade the software running on the device to the latest version using a simple internet download feature.
The optional Sentry Com Software enables you to set the values for dose and dose rate alarms and warnings, set the Cal Factor, and the data logging frequency. It also allows the user to download the accumulated dose data for analysis.
The Ranger offers maximum performance in a lightweight, rugged solution for surveying at the facility or in the field. The Ranger has been designed for industrial environments, but it still has all of the features you've come to love in the lab. The Ranger is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays and has built in efficiencies for common isotopes to calculate activity in Bq and DPM. It has a backlit digital display, a red count light, and a beeper that sounds with each count detected. Other features include selectable alert levels, an adjustable timer, and an optional wipe test plate for swipes. Internal memory and the free Observer USB Software that allows you to download your data, set computer alarms, and calibrate your instrument!
The Pancakes Kit includes two CT007-P pancake detectors and a telescoping handle in a rugged protective case. This kit is ideal for First Responder teams. For hot zone / cold zone delineation, one CT007-P is used in dose rate mode and the other is used in contamination mode. During decontamination, both detectors are used in contamination mode. The redundancy achieved by using two identical instruments for different tasks means that all tasks can still be performed, even if one of the detectors is damaged. Also, one CT007-P can be used to confirm the reading of the other one. The kit can be supplied with only one CT007-P (Kit-01) and the CT007-P is also available without accessories.
Call for price
The Radiagem 4000 meter features excellent ergonomics such as easy handling, large custom LCD display, semi-log bargraph, average digital reading, visual and audible alarms. Radiagem meter's external smart probes extend the capabilities of the instrument to a range of general surveying applications. In the "smart" design, key components of hardware circuitry (high voltage, amplifier, discriminator, etc.) are located directly inside of the probe housing rather than the host survey instrument. Also, the intelligence associated with controlling those components is located in the probe - that is, control and storage of key parameters, settings, calibrations, probe ID, alarm settings, etc. Thus the probe is a fully integrated subsystem taking and transmitting the measurement to the instrument, which is used for display.