Home Back My Cart : 0 item(s)

 

SOR/RF

SOR/RF
Price: Call for price
Product ID : MG-147493 RF

Purchase

Call for price

Description

Features:
The SOR/RF dosimeter is used for residual/ambient gamma neutron measurement
• Assignable electronic dosimeters
• Light, small and waterproof
• Rugged for battlefield use
• Hand free communication, pass-by exchange
• Data communication through clothing layers
• X-ray / gamma energies: 50 keV to 6 MeV
• Qualified MiL-STD-461F RS103
• E Field pulsed modulation greater than 200 V/m

Functional Characteristics
• Redundant architecture with passive measurement components
• Selectable units: cGy; cGy/h; mSv; mSv/h; mrem; mrem/h
• 4 configurable dose and dose rate alarm levels
• Typical one year lifetime with standard battery
• User selectable display modes
• Backlighted display (option)
• Periodic exhaustive self-testing including the detector
• Historical record of measurements and events (750 steps; 10 s; 1 min ;10 min;
   1 h; 24 h)
• Data storage in EEPROM (qualified > 10 years without battery)
• Battery fault pre-alarm (16 h) pre-alarm and alarm
• Neck lanyard or clip
• Training option

Radiological Charateristics
• Hp(10) dose equivalent measurements
• Flash gamma dose measurement**: 5 cGy to 10 Gy
• Flash neutron dose management**
• Relative error of flash measurement**: ± 30 % over measurement range
• Ambient gamma dose measurement range: 1μGy to 10 Gy
• Gamma dose rate measurement range: from 0.1 μGy/h to 10 Gy/h
• Gamma dose rate display: from background to 10 Gy/h
• Saturation indication (above 10 Gy/h)
• Relative error of ambient measurement: <± 20 % over the dose measurement
   range
• Energy response: <± 20 % in the range 60 keV to 2 MeV <± 50 % in the range 2
   MeV to 6 MeV

Mechanical Characteristics
• Dimensions: 80.4 x 48 x 9 mm (3.16 x 1.85 x 0.35 in)
• Weight: 55 g (1.94 oz)

Environmental Characteristics
• -20° to + 50°C (-4°F + 122°F) (normal operating range, standard battery 3V
   LiMnO2 CR2450)
• -40° to + 50°C (-40°F + 122°F) (option with battery module 3.6V LiSoCl2)
• Resistant to EMP, EMC, radars
• Resistant to water immersion (IP67: 1 m / 39.3 in) , drops, shocks, vibrations,
   low pressure, initial conditions, NBC environmental conditions
• Meets/exceeds the following standards: - MIL-STD-810 and MIL-STD-461
   requirements - IEC 1283, ANSI 42-20 and NATO D104 - Qualified by most of the
   NATO military laboratories

Products You May Like

  • DMCUser

    DMCUser Call for price

    DMCUser is the companion software to support operational electronic dosimetry management and maintenance in commercial nuclear, defense, homeland security and medical applications. It allows full customization, configuration, maintenance and diagnostic of any dosimeters belonging to the DMC/SOR product line. DMCUser software can be used with a wide range of products as an integrated dosimetry system, including:
    -DMC 2000, DMC 3000 and modules
    -LDM 320 D and LDM 320 W readers
    -DosiServ, DosiCare and DosiFFR software
    -IRD 2000 Irradiator

  • Beta Module for DMC 3000

    Beta Module for DMC 3000 Call for price

    The Beta Module provides operational dosimetry for hospital personal, first responders, and radiation workers where there is a Beta radiation risk.

    The add-on Beta Module attaches to the DMC 3000 dosimeter and is able to measure Hp(0,07) radiation at a wide range of energy levels. The Hp(0,07) and beta measurements, display and alarms are highly visible on the DMC 3000’s LEDs and high contrast backlit LCD display. Powered by the DMC 3000, the add-on module does not require any supplementary battery and remains operational over 1800 hours in the continuous use. Calibration and functional parameters are stored in the module.

  • Telemetry Module for DMC 3000

    Telemetry Module for DMC 3000 Call for price

    The Telemetry Module is an accessory device for the DMC3000 that physically integrates into the dosimeter’s case. The purpose of the Telemetry Module is to transmit a worker’s radiological data (accumulated dose, dose rate and alarm status) to other WRM2 Telemetry System components (Base Station, Repeater, etc.). Although the Telemetry Module has been specifically designed as the most advanced addition to our dosimetry family (DMC3000), it features seamless communication with all existing WRM2 Telemetry receivers. Additionally, the Telemetry Module provides access to a variety of accessory functions, including supplemental visual alarm indication in high-noise environments via supplied Bluetooth connectivity, as well as identification and location via supplied Wi-Fi

  • RAD-60R Personal Electronic Dosimeter

    RAD-60R Personal Dosimeter Call for price

    The RADOS RAD-60 Personal Alarming Dosimeter is a precise radiation measuring instrument for reliable detection of radiation in order to ensure the personal safety of the user. It is suitable for a broad range of everyday radiation monitoring applications in stand alone conditions.

  • LDM-320D USB Dosimeter Reader

    LDM-320D -- USB Dosimeter Reader  The LDM-320 reader operates using software packages installed on computer (PC) and communicates Call for price

    The LDM 320D reader operates using software packages installed on computer (PC) and communicate with DMC 3000 dosimeter and DMC 2000 and SOR families in hands-free data exchange mode.

  • DMC 3000 Electronic Personal Dosimeter, X-ray & Gamma

    BETA MODULE Call for price

    The DMC 3000 Personal Electronic Dosimeter has a rugged, high impact polycarbonate-ABS case, is small, lightweight, and is cost effective personal radiation monitoring device. They are designed to be worn on the body and keep a live record of both dose and dose rate. The DMC 3000 Personal Electronic Dosimeter is simple to use with 2 push buttons for an easy customized data and parameters display. The DMC 3000 has a LDC display with high-quality white backlighting.

Call us: 701-477-6461

Full Website