Home Back My Cart : 0 item(s)



Price: Call for price
Product ID : MG-126378


Call for price


The SOR dosimeter line is built upon two basic versions:
• The SOR/T™ dosimeter for tactical (gamma and neutron) and residual/ambient   gamma measurements
• And the SOR/R™ dosimeter for residual/ambient gamma measurements
• Assignable electronic dosimeters
• Waterproof, light and small
• Rugged for battlefield use
• Hand free communication, pass-by exchange
• Data communication through clothing layers Functional Characteristics
• Redundant architecture with passive measurement components
• Selectable units: cGy; cGy/h; mSv; mSv/h; mrem; mrem/h
• 4 configurable dose and dose rate alarm levels
• Typical one year lifetime with standard battery
• User selectable display modes
• Backlighted display (option)
• Periodic exhaustive self-testing including the detector
• Historical record of measurements and events (750 steps; 10 s; 1 min ;10 min;
  1 h; 24 h)
• Data storage in EEPROM (qualified> 10 years without battery)
• Battery low (16 h) pre-alarm and alarm if the battery is removed
• Neck lanyard or clip
• Real time teledosimetry transmission (up to 1000 m - 3281 ft range) for SOR/R

Physical Characteristics
• Hp(10) dose equivalent measurements
• Flash gamma dose measurement**: 5 cGy to 10 Gy
• Flash neutron dose management**
• Relative error of fl ash measurement**: ± 30 % over measurement range
• Ambient gamma dose measurement range: 1μGy to 10 Gy
• Gamma dose rate measurement range: from 0.1 μGy/h to 10 Gy/h
• Gamma dose rate display: from 1 or 10 μGy/h to 10 Gy/h
• Saturation indication (above 10 Gy/h)
• Relative error of ambient measurement: <± 20 % over the dose measurement    range
• Energy response: <± 20 % in the range 60 keV to 2 MeV <± 50 % in the range 2        MeV to 6 MeV
• Accredited factory calibration to IEC 17025
• Accuracy <± 10 % (137Cs, ~ 25 mSv/h including ± 5 % of extended uncertainty       K=2)

Mechanical Characteristics
• Dimensions: 80.4 x 48 x 9 mm (3.16 x 1.85 x 0.35 in)
• Weight: 55 g (1.94 oz)

Environmental Characteristics
• -20° to + 50°C (-4°F + 122°F) (normal operating range, standard battery 3V    LiMnO2 CR2450)
• -40° to + 50°C (-40°F + 122°F) (option with battery module 3.6V LiSoCl2)
• TREE protection (SOR/R and SOR/T)
• Resistant to EMP, EMC, radars
• Resistant to water immersion (IP67: 1 m / 39.3 in) , drops, shocks, vibrations,    low pressure, - Initial conditions, NBC environmental conditions
• Complies with the following standards: - Meets MIL-STD-810 and MIL-STD-461       requirements - Qualified by most of the NATO military laboratories - Complies      with IEC 1283, ANSI 42-20 and NATO D104 144258EN-D

Products You May Like

  • RAD-60R Personal Electronic Dosimeter

    RAD-60R Personal Dosimeter Call for price

    The RADOS RAD-60 Personal Alarming Dosimeter is a precise radiation measuring instrument for reliable detection of radiation in order to ensure the personal safety of the user. It is suitable for a broad range of everyday radiation monitoring applications in stand alone conditions.

  • DMC 3000 Electronic Personal Dosimeter, X-ray & Gamma

    BETA MODULE Call for price

    The DMC 3000 Personal Electronic Dosimeter has a rugged, high impact polycarbonate-ABS case, is small, lightweight, and is cost effective personal radiation monitoring device. They are designed to be worn on the body and keep a live record of both dose and dose rate. The DMC 3000 Personal Electronic Dosimeter is simple to use with 2 push buttons for an easy customized data and parameters display. The DMC 3000 has a LDC display with high-quality white backlighting.

  • Neutron Module for DMC 3000

    Neutron Module for DMC 3000 Call for price

    The Neutron Module provides operational dosimetry for Military, first responders, and radiation workers where there is a Neutron radiation risk.

    The add-on Neutron Module attaches to the DMC 3000 dosimeter and is able to measure Hp(10) radiation at a wide range of energy levels.

    The Hp(10) and Neutron measurements, display and alarms are highly visible on the DMC 3000’s LEDs and high contrast backlit LCD display. Powered by the DMC 3000, the add-on module does not require any supplementary battery and remains operational over 2000 hours in the continuous use. Calibration and functional parameters are stored in the module.

  • LDM-320D USB Dosimeter Reader

    LDM-320D -- USB Dosimeter Reader  The LDM-320 reader operates using software packages installed on computer (PC) and communicates Call for price

    The LDM 320D reader operates using software packages installed on computer (PC) and communicate with DMC 3000 dosimeter and DMC 2000 and SOR families in hands-free data exchange mode.

  • DMCUser

    DMCUser Call for price

    DMCUser is the companion software to support operational electronic dosimetry management and maintenance in commercial nuclear, defense, homeland security and medical applications. It allows full customization, configuration, maintenance and diagnostic of any dosimeters belonging to the DMC/SOR product line. DMCUser software can be used with a wide range of products as an integrated dosimetry system, including:
    -DMC 2000, DMC 3000 and modules
    -LDM 320 D and LDM 320 W readers
    -DosiServ, DosiCare and DosiFFR software
    -IRD 2000 Irradiator

  • SOR/RF

    SOR/RF Call for price

    An important special feature of the SOR line is its ability to meet the needs of various applications with one product. Given its multi-detector architecture the measurement range covered is broad, and includes high level gamma and neutron dose rates as well as low level radiations (L.L.R). These dosimeters are qualified in accordance with current military and civil standards. The SOR line has even exceeded some of the standards currently in use in order to account for harsh operational environments. The SOR dosimeter has been selected by most NATO countries.

Call us: 701-477-6461

Full Website