Home Back My Cart : 0 item(s)

 

LDM-320D USB Dosimeter Reader

LDM-320D -- USB Dosimeter Reader  The LDM-320 reader operates using software packages installed on computer (PC) and communicates
Price: Call for price
Product ID : MG-150534
Manufacturer: Mirion Technologies (MGP)

Purchase

Call for price

Description

LDM-320 - USB Dosimeter Reader

 

The LDM 320D and LDM 320W readers operate using software packages installed on computer (PC) and communicate with DMC 3000 dosimeter and DMC 2000 and SOR families in hands-free data exchange mode. the LDM 320 reader is used as an interface to activate a dosimeter (to switch into counting mode) or to deactivate it (to switch into pause mode). When used with the included* DMCUser software, it functions as an interface to read and write the internal data of the DMC 3000, SOR and DMC 2000 dosimeters.

FEATURES

  • Dosimeter reader is compact and low-cost.
  • Hands-free communication with dosimeters
  • No directional alignment required
  • 3 Indicator LEDs for operation and access control
  • Manageable digital inputs/outputs
  • DSP based digital process
  • Compatible with the DMC 2000 and SOR famillies, iPAM-Tx as well as the DMC 3000 dosimeter
  • Compatible with software packages: DOSICARE, DOSIFAST, DMCUser and LDM 3000SW
  • Wall-mounted or desk versions (wall mount LDM-320W ITEM #MG-150517)

 

TECHNICAL SPECIFICATIONS:

Mechanical Characteristics:

LDM 320D

Length: 109 mm (4.3 in)

Width: 100 mm (3.9 in)

Depth: 29 mm (1.1 in)

Weight: 150 gr (5.3 oz)

Environmental Characteristics:

  • Operating temperature: 0°C to +50°C (32°F to 122°F)
  • Storage temperature: -10°C to +60°C (+14°F to 140°F)
  • Humidity: 90% HR (without condensation)
  • IP LDM 320D: IP52

 

 

 

More images

Products You May Like

  • DMC 3000 Electronic Personal Dosimeter, X-ray & Gamma

    BETA MODULE Call for price

    The DMC 3000 Personal Electronic Dosimeter has a rugged, high impact polycarbonate-ABS case, is small, lightweight, and is cost effective personal radiation monitoring device. They are designed to be worn on the body and keep a live record of both dose and dose rate. The DMC 3000 Personal Electronic Dosimeter is simple to use with 2 push buttons for an easy customized data and parameters display. The DMC 3000 has a LDC display with high-quality white backlighting.

  • RAD-60R Personal Electronic Dosimeter

    RAD-60R Personal Dosimeter Call for price

    The RADOS RAD-60 Personal Alarming Dosimeter is a precise radiation measuring instrument for reliable detection of radiation in order to ensure the personal safety of the user. It is suitable for a broad range of everyday radiation monitoring applications in stand alone conditions.

  • Neutron Module for DMC 3000

    Neutron Module for DMC 3000 Call for price

    The Neutron Module provides operational dosimetry for Military, first responders, and radiation workers where there is a Neutron radiation risk.

    The add-on Neutron Module attaches to the DMC 3000 dosimeter and is able to measure Hp(10) radiation at a wide range of energy levels.

    The Hp(10) and Neutron measurements, display and alarms are highly visible on the DMC 3000’s LEDs and high contrast backlit LCD display. Powered by the DMC 3000, the add-on module does not require any supplementary battery and remains operational over 2000 hours in the continuous use. Calibration and functional parameters are stored in the module.

  • DMCUser

    DMCUser Call for price

    DMCUser is the companion software to support operational electronic dosimetry management and maintenance in commercial nuclear, defense, homeland security and medical applications. It allows full customization, configuration, maintenance and diagnostic of any dosimeters belonging to the DMC/SOR product line. DMCUser software can be used with a wide range of products as an integrated dosimetry system, including:
    -DMC 2000, DMC 3000 and modules
    -LDM 320 D and LDM 320 W readers
    -DosiServ, DosiCare and DosiFFR software
    -IRD 2000 Irradiator

  • Telemetry Module for DMC 3000

    Telemetry Module for DMC 3000 Call for price

    The Telemetry Module is an accessory device for the DMC3000 that physically integrates into the dosimeter’s case. The purpose of the Telemetry Module is to transmit a worker’s radiological data (accumulated dose, dose rate and alarm status) to other WRM2 Telemetry System components (Base Station, Repeater, etc.). Although the Telemetry Module has been specifically designed as the most advanced addition to our dosimetry family (DMC3000), it features seamless communication with all existing WRM2 Telemetry receivers. Additionally, the Telemetry Module provides access to a variety of accessory functions, including supplemental visual alarm indication in high-noise environments via supplied Bluetooth connectivity, as well as identification and location via supplied Wi-Fi

  • Beta Module for DMC 3000

    Beta Module for DMC 3000 Call for price

    The Beta Module provides operational dosimetry for hospital personal, first responders, and radiation workers where there is a Beta radiation risk.

    The add-on Beta Module attaches to the DMC 3000 dosimeter and is able to measure Hp(0,07) radiation at a wide range of energy levels. The Hp(0,07) and beta measurements, display and alarms are highly visible on the DMC 3000’s LEDs and high contrast backlit LCD display. Powered by the DMC 3000, the add-on module does not require any supplementary battery and remains operational over 1800 hours in the continuous use. Calibration and functional parameters are stored in the module.

Call us: 701-477-6461

Full Website