RAP-RS2 Probe - External Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.).
mR/hr - .001 (1µR) to 100 CPM - 0 to 350,000
µSv/hr - .01 to 1000 CPS - 0 to 5000
Total/Timer - 1 to 9,999,000 counts
(Referenced to Cs137) Typically ±15% from factory, ±10% with NIST Source Calibration
3340 CPM/mR/hr referenced to Cs137
Graphic LCD with Backlight
mR/hr .001 - 100 and CPM 1 - 350,000.
70db @ 1m.
Red LED lashes with each radiation event.
Internally mounted beeper (can be switched off for silent operation)
5 Sulfur (S35), 90 Strontium (Sr/y90), 137Cesium
(Cs137), 32 Phosphorus (P32), 14Carbon (C14),
131 Iodine (I131), 60Cobalt (Co60), and Alpha
End Window efficiency at 1 MeV is approx. 25%.
Detects Gamma down to 10 KeV through the end window.
Smallest detectable level for I125 is .02 µCi at 1
140 X 68 X 33 mm (5.5 X 2.7 X 1.3 in.)
Probe: 260 X 70 X 25 mm (10.25 X 2.75 X 1 in)
USB for use with Observer USB Software Family
Meter will hold at full scale in fields as high as 100 times the maximum reading.
Power Requirements Two AA alkaline batteries.
Includes: Carrying Case, Xtreme Boot, Stand, Mini-USB Cable, Observer USB Software Download , Certificate of Conformance
1 year limited warranty
Monitor 4 & 4EC Handheld Radiation Alert® Detector The M4 and M4EC are compact, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays ( above 40 keV). Monitor 4 is a halogen-quenched uncompensated GM tube with thin mica window 1.5-2.0 mg/cm2 thick. Monitor 4EC is a halogen-quenched GM tube, energy compensated sidewall 2mm thin filter. Thin mica window 1.5-2.0 mg/cm2 thick. Effective diameter of window is 9.1mm (.36 in.)
The Nanonuke is a very small, yet highly sensitive radiation detector that fits into the smallest pocket, without pinching the wearer. It can connect to a smartphone via Bluetooth Low Energy (BLE). When connected to a phone, our GammaGuard app provides a rich user interface (UI). The user only interacts with the phone and NanoNuke remains ergonomically out of the way in the user’s pocket or at a remote location. This is ideal for covertly checking an area for radiation. The GammaGuard app can run in the background and alert the user of elevated radiation levels. The GammaGuard app allows for time and date stamped data logging with GPS coordinates. The data can be logged to a file on the phone and it can (optionally) be logged to web based databases, such as RadResponder, facilitating a coordinated incident response. Two NanoNukes can be connected to GammaGuard at the same time and can be used as a directional radiation detector (patent pending). Prior to NanoNuke, specialized direction finding equipment was large, bulky, complex, fragile and expensive.
Call for price
The CT007-F, CT007-N, CT-007-P connects to the smartphone application, GammaGuard. By itself, GammaGuard can provide basic radiation detection, and warn the user of dangerous radiation levels. It achieves this by using your smartphone’s camera as a radiation sensor. Other more sophisticated or sensitive radiation measurement instruments, such as the CT007 units, can be wirelessly connected to GammaGuard for enhanced functionality.
The IMI Inspector Alert™V2 measures alpha, beta, gamma and X-radiation using a 2-inch "pancake" GM detector with high sensitivity to common beta and alpha sources. The easy-to-read digital display shows reading in your choice of Dose Rate - µSv/hr or mR/hr, and Count Rate - CPM or CPS. The Total I Timer feature allows timed readings from one minute to 40 hours for precise measurement of low-level contamination. An Audible alert sounds when the radiation reaches a user-adjustable level. -Quickly alerts user to the presence of harmful levels of nuclear radiation -Detects noble gases and low energy radionuclides -Automatically compensates for GM tube dead time -Will not jam in high radiation fields -Meets CE Certification, RoHS compliant and WEEE standards
The Monitor 1000EC is an energy compensated radiation detector that measures gamma, and x-rays. Perfect for most applications requiring an energy compensated detector. Users can choose from readings of CPM, CPS, µSv/hr, mR/hr, or in accumulated counts. It has a red count light, a beeper that sounds with each count detected, and includes an adjustable timer, and selectable alert. With the free Observer Software for PCs and Android OS, you can automate and record readings for easy reporting!
The Ranger offers maximum performance in a lightweight, rugged solution for surveying at the facility or in the field. The Ranger has been designed for industrial environments, but it still has all of the features you've come to love in the lab. The Ranger is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays and has built in efficiencies for common isotopes to calculate activity in Bq and DPM. It has a backlit digital display, a red count light, and a beeper that sounds with each count detected. Other features include selectable alert levels, an adjustable timer, and an optional wipe test plate for swipes. Internal memory and the free Observer USB Software that allows you to download your data, set computer alarms, and calibrate your instrument!